The only way I can get my PDM28 to wake up is with USB connected to power. I've verified I have battery voltage on the enable pin (DTM B-1)
I am on firmware v1.1.1
top of page
To test this feature, visit your live site.
PDM28 enable pin issue
PDM28 enable pin issue
4 comments
Like
4 Comments
bottom of page
Hi George, thanks for the reply.
In the UI, I read 13.3v for battery. When I measure voltage at the pin to the PDM ground, I measure 13.24V
The 5V rail in monitor is at 3.7V though