So i have an issue that is hopefully easy to understand/fix. All of my inputs to the PDM are ground inputs. In particular my starter button is a ground input to the PDM, and the output of the PDM is the 12v trigger for a relay that actually sends the starter signal to the starter. Everytime i turn on the ign (not start, just into ign on) the actual starter click for half a second. SOMETIMES the starter will actually turn over a couple times. None of my other outputs that are based on ground inputs seem to trigger. Do the inputs all rest at ground, and it takes a short period of time from when the pdm recieves it 12v signal, to bring the inputs above "up"? Im sure its something explained easily in the manual, but sometimes with this stuff i need my hand held to understand it fully. So any help would be appreciated on how to fix this issue.
top of page
To test this feature, visit your live site.
PDM outputs activating at power on -- sometimes
PDM outputs activating at power on -- sometimes
2 comments
Like
2 Comments
bottom of page
Hi, Please put a condition on these outputs of PDM on time > 1, or instead of input x status Equals True put input x on time > 1. This issue can happen becasue for the split second at start up, the inputs are still at 0V and havent risen to the normal value.