Maybe I'm missing something in the setup. I have them configured as active low and 0 volts. Is that correct?
Everything else works that does not use a ground for the input. Even the starter trigger which is configured to not work unless the clutch pedal is depressed. The switch on my clutch pedal is grounded when the pedal is at rest. When I depress the pedal it loses ground. I configured it as on if input 1(start) status equals true AND input 7(clutch) status does not equal true.
Seems to me that something is preventing any of the ground related inputs from working.
Nevermind. I reread the manual and noticed that the inputs set up as active low have to fall below the threshold voltage to enable so setting them at active low and zero volts would never enable them. .1 volts works.