Is there a way to set up and output to run my on board air compressor? Im wanting it to come on below 100psi and off at 140psi. I need to set up a hysteresis. Any help would be appreciated
I depends on what amps the compressor draws . Ive got a Viair 444C air suspension compressor set up to work with the the PDM and keyboard. That only draws a max continuous of 20 amps. All you need is an air pressure sender for an input, a 200psi sender would work.
Yes I've also set it up so it wont turn the compressors on when the engines not running unless i select it on the keypad. It also turns on if the cars moving, above 30mph, but off throttle as long the air pressure is below 200psi.
I depends on what amps the compressor draws . Ive got a Viair 444C air suspension compressor set up to work with the the PDM and keyboard. That only draws a max continuous of 20 amps. All you need is an air pressure sender for an input, a 200psi sender would work.