Fault State

So that's pretty much how I have it set up. Anything activated by the keypad will go red if it trips the output. I also have a keypad button for reset and cutoff (cutoff on a 5second press).

What I was hoping for is that button (global reset) to show red if a output trips that's not assigned to a keypad so that you know if something's blown

i generally use 2x outputs for fuel pumps. so ill set fuel output 1 to the fuel pump key. and the button below it, which is usually reset to fuel output 2. if you have any unused buttons you can set those to outputs with no keypad function for me, there are also certain circuits that i dont care about much. Email hardwire and ask for a feature request of a overall fault channel to assign to a keypad button.