Im having issue trying to get the CAN to work on the PDM 25+. My ECU needs the CAN ID to send and receive data, but i have not got the CAN ID for the PDM. Does anyone know what it is as its not in the manual and i cant see it in the configuration software.
top of page
bottom of page
Thanks for the advice. I think one of the issues may be that the can set up for the link G4x on the PDM is different to what it outputs.
however I think I'm slowly getting my head around the way the PDM works with CAN compared to my ecus and rest my stuff. Yeah, I realise now that the Filter will do exactly what it says and then the inputs are related to that particular Filter and where on the Link a Frame is a group of parameters, the PDM a frame is an individual parameter.
I think rather than using the link generic CAN steam stuff p
on the Link ECU, I'll just use more stream outputs and can ID's but with less parameter's on each ID. Realistically the PDM only needs a handful of inputs from the ecu to do everything. On a few occasions the ecu is just sending a signal to switch something on by the PDM.